USB Relay Controller:With this USB Relay controller, you can control the switch on your PC or laptop. Silicon Labs CP2102N Serial Chip:You need to install the driver the first time you use it, and a virtual serial port will appear on your computer. You can send commands to the serial port to switch operations. OMRON G5V-1 Relay: Rated load(0.5A at 125 VAC;1A at 24 VDC ) ;Max. switching voltage (125 VAC, 60 VDC) Compatibility: This USB Relay Board is compatible with Windows 7, 8, 10 and various Linux OS and Mac OS.
Technical Support & File：
Specification:
Model: SH-UR01A
Main chip: Silicon Labs CP2102N
Interface: serial port
Pin Definition: COM,NO,NC
Connectors: USB Type A, 3 PIN Terminal Block
USB 2.0; compatible USB 1.1
Plug & Play after one time driver installation;
Precautions:
If you need to use this USB controller to control AC switching, in order to protect your computer, we recommend you to use a USB isolator (ASIN:B093LKN3YH)
OMRON G5V-1 Relay:
Wide switching power of 1 mA to 1 A.
Rated load: 0.5 A at 125 VAC; 1 A at 24 VDC
Rated carry current:2 A
Max. switching voltage:125 VAC, 60 VDC
Max. switching current:1 A
AT Command:
Default UART Setting: Baud rate：9600 ;Stop Bits:1 ;Parity：None; Data Bits：8
1, AT ; Test Command, you will get "OK"
2, AT+CH1=1; Close the relay of channel 1
3, AT+CH1=0; Turn on the relay of channel 1
4, AT+BAUD=115200; Modify the baud rate to 115200
Packing list:
1 X SH-UR01A USB Relay controller
1 X USB extension cable(1M/3.2FT)
1 X User Manual
Technical Support & File：
Specification:
Model: SH-UR01A
Main chip: Silicon Labs CP2102N
Interface: serial port
Pin Definition: COM,NO,NC
Connectors: USB Type A, 3 PIN Terminal Block
USB 2.0; compatible USB 1.1
Plug & Play after one time driver installation;
Precautions:
If you need to use this USB controller to control AC switching, in order to protect your computer, we recommend you to use a USB isolator (ASIN:B093LKN3YH)
OMRON G5V-1 Relay:
Wide switching power of 1 mA to 1 A.
Rated load: 0.5 A at 125 VAC; 1 A at 24 VDC
Rated carry current:2 A
Max. switching voltage:125 VAC, 60 VDC
Max. switching current:1 A
AT Command:
Default UART Setting: Baud rate：9600 ;Stop Bits:1 ;Parity：None; Data Bits：8
1, AT ; Test Command, you will get "OK"
2, AT+CH1=1; Close the relay of channel 1
3, AT+CH1=0; Turn on the relay of channel 1
4, AT+BAUD=115200; Modify the baud rate to 115200
Packing list:
1 X SH-UR01A USB Relay controller
1 X USB extension cable(1M/3.2FT)
1 X User Manual
