Just for Raspberry Pi 5: Pi 5 adds a dedicated 3-pin UART debug port. the Raspberry Pi 5 system can be accessed directly from the serial port.However, it uses a 1.0mm pitch 3-pin JST-SH connector .This made it necessary to spend a little extra time or money to debug the Pi5 using the serial port. 3PIN 1.0MM to 2.54MM: SH-C02A has a 3PIN 1.0MM connector on one end and a 2.54mm connector on the other. With this conversion, you can connect your USB UART adapter to the Pi 5, and you don't need to buy an additional Raspberry Pi Debug Probe . Compatibility:It is theoretically compatible with any USB to TTL/UART adapter, but it is designed to work with DSD TECH USB UART adapters, so you can connect it in less than 30 seconds without having to think about the connection sequence. It is fully compatible with the following USB UART adapters: SH-U09C2, SH-U09C5, SH-U09C,SH-U09G.
Technical Support & File
SH-C02A is designed for Raspberry Pi 5. With this adapter cable, you can use your USB UART adapter to debug the Pi5 serially without having to buy a dedicated Raspberry Pi 5.
Please note:
SH-C02A is just a conversion cable. It does not support the Serial Wire Debug (SWD) function when you connect the USB UART adapter.
Specification:
Model: SH-C02A
Connectors: 3PIN(1.0MM) ,5PIN(2.54MM)
Cable Lenght: 32CM/12INCH
Compatibility:
SH-U09C2 USB to TTL Adapter
SH-U09C USB to TTL Adapter
SH-U09C5 USB to TTL Adapter
SH-U09G USB to UART Cable(need to consider the connection sequence)
Other USB UART Adapter(need to consider the connection sequence)
Packing list:
2 X SH-RJ50C APC UPS Data Cable()
Technical Support & File
SH-C02A is designed for Raspberry Pi 5. With this adapter cable, you can use your USB UART adapter to debug the Pi5 serially without having to buy a dedicated Raspberry Pi 5.
Please note:
SH-C02A is just a conversion cable. It does not support the Serial Wire Debug (SWD) function when you connect the USB UART adapter.
Specification:
Model: SH-C02A
Connectors: 3PIN(1.0MM) ,5PIN(2.54MM)
Cable Lenght: 32CM/12INCH
Compatibility:
SH-U09C2 USB to TTL Adapter
SH-U09C USB to TTL Adapter
SH-U09C5 USB to TTL Adapter
SH-U09G USB to UART Cable(need to consider the connection sequence)
Other USB UART Adapter(need to consider the connection sequence)
Packing list:
2 X SH-RJ50C APC UPS Data Cable()
